List Price: $60.00
Your Price: $45.00
Item Number: PRF-15238
Manufacturer Part No: PRF-15238
PRF-15238, 6" Steel-Pro, 38 teeth
, 1/2" Arbor
Tooth Geometry (GRIND) MTCG (Modified Triple Chip Grind)
0.079 inch KERF, Maximum Speed 9500 RPM
Recommended Machine: Corded Trim
Recommended for Ferrous Metals
Application: For cordless or corded saws.
TENRYU's steel cutting carbide tipped saw blades for industrial performance
Cut ferrous metals (mild steel) faster, cleaner and easier. Save time, money, the environment, and your respiratory health.
TENRYU's complete series of steel cutting saw blades called "Steel-Pro" makes light work out of all kinds of mild steel: steel studs, steel sheet, steel pipe, channel, threaded rod and much, much more.
Specially formulated C-6 carbide grade, combined with our unique tip design, resists breakage on impact and lasts longer- much longer than standard carbides or abrasive discs. Special tooth geometry with "inserted" tooth design greatly improves security of the tip, efficiency and durability.
Abrasive discs throw sparks and lots of dust including unhealthful fiberglass. You shouldn't be breathing it in! Steel-Pro blades reduce spark production and eliminate abrasive wheel dust.
Abrasive discs wear quickly, requiring frequent blade changes. Steel-Pro blades allow you to keep working; eliminating down time for frequent blade changes. In addition, Steel-Pro cuts 5 to 10 times faster than abrasives. Typically, one Steel-Pro blade will outlast somewhere between 15 to 30 abrasive blades. Think of all that non-productive "down time".
Abrasive discs leave a sharp burr at the cutting edge that must be removed later. Steel-Pro blades cut clean; eliminating this extremely time-consuming after-cut process. "Time is money". Steel-Pro saves BOTH!
EACH BLADE FEATURES:
Rugged plates and specially formulated carbide tips with a special tooth grind for fast, clean cuts.
High quality cuts without the clouds of dust and scorch marks associated with friction blades.
Cool cuts that leave the work piece edge free of burrs.
Reduced cost-per-cut and maximized performance for the operator as a result of fewer blade changes.
Please note all safety instructions before use and adhere to instructions for maximum RPM speeds
ALWAYS WEAR EYE PROTECTION that meets ANSI Z87.1 requir4ements and PROPERLY FUNCTIONING UPPER and LOWER BLADE GUARDS.