CDI 1002CF3

FEATURES

• Sleek New Design
  
• 15-Degree Flex Ratcheting Head
  
• Push Button Socket Release Head
  
• Large, Easy to Read Digital Display
  
• Long Battery Life, Uses 2 Each CR123 Lithium Batteries
  
• Ergonomically Designed Molded Nom-Slip Rubber Grip
  
• Torques in Both Clockwise and Counterclockwise Directions
  
• Battery Saving Auto-Shutoff After Two Minutes
  
• COMPUTORQ3 Remembers Last Unit and Torque Setting Selected
  
• Audible Tone Sounds when Set Torque Value is Reached, if the Set Torque Value is Exceeded, an Alarm Tone will Sound.
  
• 3 Color LED Light Bar
  YELLOW LED Indicates Approaching Desired Torque Setting
  GREEN LED Indicates Desired Torque Value is Reached
  RED LED Indicates Fastener was Overtorqued, Loosen and Retighten.
  
• When Desired Torque Value is Reached, Display will Hold Value and Flash for Ten Seconds.
  
• COMPUTORQ3 will Operate in any of Four Torque Units, Foot Pounds (Ft. Lbs.), Inch Pounds (In. Lbs.), Newton Meter (NM) or Kilogram Centimeter (Kg. CM.).
  
• ACCURACY: 2% CW of Readings from 20% to 100% of Full Scale 3% CCW of Readings from 20% to 100% of Full Scale
  
• N.I.S.T. Traceable Certificate of Calibration Included